Disco
DFD 6362
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Disco DFD 6362 is a fully automatic dicing saw. The DFD 6362 is designed for processing 300 mm wafers. The DFD 6362 is equipped with a facing dual-spindle configuration.[1]
How it works
The DFD 6362 uses a lower arm to move a workpiece from a cassette to a pre-alignment stage. The lower arm then transfers the workpiece to a chuck table for cutting. After cutting, an upper arm moves the workpiece to a spinner table for cleaning and drying. The lower arm returns the cleaned workpiece to the cassette.[1]
The DFD 6362 includes an Automatic Blade Changer option that automates blade replacement and precut procedures after blade breakage or at end of blade life. The system scans a 2D barcode on the blade to prevent human error. The machine also features advanced graphical operation software that displays operation buttons on the same screen as the microscope picture.[1]
Where it fits in the process flow
Applications
The DFD 6362 offers a throughput improvement of approximately seven percent compared to the previous model under the same conditions, achieved by a shortened distance between spindles and improved X-axis return speed. The machine supports spindle power ratings of 1.2 kW, 1.8 kW, and 2.2 kW, with rotation speed ranges from 6,000 to 60,000 min-1 for standard spindles and up to 80,000 min-1 for a high-speed rotation option. Positioning accuracy is within 0.002 mm over 310 mm travel.[1]
What do the numbers mean?
Power & electrical7
Wafer handling2
Performance1
Dimensions & facilities2
Configuration & options16
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Spindle rated torque (1.2 kW / high-speed rotation)0.19 N·m[1]
- Spindle rotation speed range (1.2 kW / 1.8 kW)6,000 – 60,000 min⁻¹[1]
- Power supply phase3 Phase[2]
- Power frequency50/60 Hz[2]
- Voltage range308 – 415 VAC ±10%, 3 Phase[2]
- Standard spindle power1.2 kW[3]
- Optional spindle powers1.8 kW or 2.2 kW[3]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What maximum workpiece size does the DFD 6362 support?
The DFD 6362 supports a maximum workpiece size of 300 mm.[1]
What is the cutting speed range of the DFD 6362?
The X-axis cutting speed range is 0.1 to 1,000 mm/s.[1]
What are the spindle speed ranges available for the DFD 6362?
For the 1.2 kW and 1.8 kW spindles, the rotation speed range is 6,000 to 60,000 min-1. For the high-speed rotation spindle, the range is 20,000 to 80,000 min-1. A 2.2 kW spindle is also available with a range of 3,000 to 30,000 min-1.[1]
What are the power requirements for the DFD 6362?
The DFD 6362 requires 3-phase power at 50/60 Hz, with voltage of 308 to 415 VAC ±10%.[2]
What is the positioning accuracy of the DFD 6362?
The positioning accuracy is within 0.002 mm over 310 mm travel (single error).[1]
Not publicly documented
The following facts about the DFD 6362 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DFD 6362 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DFD 6362 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DFD 6362 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DFD 6362 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DFD 6362 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]disco.com.sg — disco.com.sgdisco.com.sg
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]agsemiconductor.comagsemiconductor.com
- [4]Disco DFD 6362 - C2MI — c2mi.cac2mi.ca
- [5]Equipment inventory listing
Last updated Oct 7, 2026.
Compare with similar tools
View all →
The Lapmaster Model 15 is a bench-mounted unit with a rigid, lightweight, cast aluminum base, of the 'ring lapper' configuration, enabling high standards of flatness and surface finish.
General referenceThe Blanchard 18 D Surface is a vertical-spindle rotary-table surface grinding machine used to produce flat, parallel surfaces on metal workpieces.
The Blanchard 20 36 Surface is a surface grinder used in dicing and grinding applications.
