Comparison ledger
Blanchard 18 D Surface, Disco DFD 6361 Fully Automatic Dicing, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 18 D SurfaceBlanchard | |
|---|---|---|
| OEM | Blanchard | Disco |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Blanchard 18 D Surface | Disco DFD 6361 Fully Automatic Dicing |
| Specifications | ||
| Voltage | 416 V[1] | — |
| Phase | 3 Phase[1] | — |
| Cycles | 50[1] | — |
| Control Voltage | 110[1] | — |
| Make | Blanchard[1] | — |
| Model | 18 D[1] | — |
| Asset # | 153970[1] | — |
| Power | 416 V, 3 phase[1] | — |
| Max workpiece size | — | 300 mm[3] |
| X-axis cutting range | — | 310 mm[3] |
| Cut speed | — | 0.1 to 600 mm/s[3] |
| Y1-axis cutting range | — | 310 mm[3] |
| Index step | — | 0.0001 mm[3] |
| Y2-axis positioning accuracy | — | 0.003 mm/310 (single error), ≤0.002 mm/5[3] |
| Z1-axis max stroke | — | 14.7 mm (for 2-inch blade)[3] |
| Z-axis moving resolution | — | 0.00005 mm[3] |
| Z2-axis repeating accuracy | — | 0.001 mm[3] |
| Maximum blade size | — | 58 mm diameter[3] |
| θ-axis max rotating angle | — | 380 degrees[3] |
| Spindle output (standard) | — | 1.2 kW at 60,000 min⁻¹[3] |
| Spindle speed range | — | 6,000 to 60,000 min⁻¹[3] |
| Power supply | — | 200-240 V AC ±10%, 3-phase, 50/60 Hz[3] |
| Power consumption (processing) | — | 2.2 kW (reference)[3] |
| Power consumption (warm-up) | — | 1.8 kW (reference)[3] |
| Air pressure | — | 0.5 to 0.8 MPa[3] |
| Average air consumption | — | 189.0 L/min (ANR, reference)[3] |
| Clean air pressure | — | 0.5 to 0.8 MPa[3] |
| Average clean air consumption | — | 65.0 L/min (ANR, reference)[3] |
| Cutting water pressure | — | 0.2 to 0.4 MPa[3] |
| Cutting water max flow rate | — | 12 L/min[3] |
| Water curtain max flow rate | — | 1 L/min[3] |
| Other water max flow rate | — | 1 L/min[3] |
| Cooling water pressure | — | 0.2 to 0.4 MPa[3] |
| Cooling water flow rate | — | 3.0 L/min at 0.3 MPa[3] |
| Exhaust duct capacity | — | 5.0 m³/min[3] |
| Machine dimensions (W×D×H) | — | 1200×1550×1800 mm[3] |
| Machine weight | — | Approx. 2,050 kg (without transformer), approx. 2,150 kg (with transformer)[3] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →