Teradyne

Nextest Magnum II PV

Test & Probe Teradyne Nextest Magnum family

Research Quality: 50% complete

Nextest Magnum II PV — Inventory photo — Fig. 01Nextest Magnum II PVInventory photo^[1]

What it is

The Teradyne Nextest Magnum II PV is a tester identified with a single phase, 50/60 Hz electrical configuration.^[1]^[5]

How it works

The Teradyne Nextest Magnum II PV system can be configured with a host computer, site assembly hardware, digital channels, test site controllers, algorithmic pattern generators, device power supplies, system PMU functions, per-pin PTU functions, high-voltage pins, and memory options.^[7]

Where it fits in the process flow

General reference — not yet source-verified

A test and probe system belongs in wafer-level electrical test and characterization before package assembly.

Applications

General reference — not yet source-verified

Test and probe equipment is used for semiconductor wafer probing, parametric probing, and electrical evaluation of devices at the wafer stage.

What do the numbers mean?

Power & electrical4

Single Phase^[1]; 50/60 Hz^[1]
Power / electrical: Single Phase^[5]
Frequency: 50/60 Hz^[5]

Control & software1

Host computer: EV2/PV2 configured with UI4.x, WinServer 2012, Visual Studio 2013^[7]

Configuration & options11

With:^[1]; SA Board 515001 (x2)^[1]; IPC^[1]; Workstation^[1]; Manipulator^[1]
OEM: Teradyne^[5]
Model: Nextest Magnum II PV^[5]
Category: Test & Probe^[5]
Included configuration: SA Board 515001 (x2), IPC, workstation, manipulator^[1]
Included configuration: SAB 511501 (x2), IPC firmware 5.4.14, Dell T5810 workstation, Esmo or SCM manipulator available^[6]; Magnum II PV System Chassis^[7]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

ConfigurationSingle Phase^[1]
Configuration50/60 Hz^[1]
Power / electricalSingle Phase^[5]
Frequency50/60 Hz^[5]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the electrical configuration of the Magnum II PV?

The Magnum II PV operates on a single-phase, 50/60 Hz electrical configuration.^[1]^[5]

What memory options are available for the Magnum II PV?

Available memory options include error capture memory (ECR, 36GB/1.152GB), row/column memory (RCM, 36MB), data buffer memory (DBM, 18GB/1.152GB), and vector memory (LVM, 64MV/128MV).^[7]

Not publicly documented

The following facts about the Nextest Magnum II PV are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Nextest Magnum II PV are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Nextest Magnum II PV are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Nextest Magnum II PV are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Nextest Magnum II PV are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Nextest Magnum II PV is not on record.
Answerable by: an OEM datasheet or a fab qualification report