Speedline
Microcel S 2 Centrifugal Cleaning
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Speedline Microcel S 2 is a centrifugal cleaning system. The Speedline Microcel S 2 is categorized as a wet processing and cleaning tool.[1][2]
What it is
How it works
General reference — not yet source-verifiedCentrifugal cleaning systems spin substrates at high speed while applying cleaning chemistry, then rinse and dry them within the same chamber.
The centrifugal action flings spent fluid off the substrate edge, enabling rapid sequential process steps without transferring the part between stations.
Where it fits in the process flow
General reference — not yet source-verifiedCentrifugal cleaning tools are positioned after wafer thinning, dicing, or polishing steps where debris and slurry residues must be removed before final inspection or packaging.
Such equipment may also be used between photolithography and etch steps to eliminate particulate contamination that could cause defects.
Applications
General reference — not yet source-verifiedCentrifugal cleaning systems are used for post-grind cleaning, post-CMP cleaning, and general substrate cleaning in semiconductor and advanced packaging fabs.
What do the numbers mean?
No specifications recorded yet
Be the first to add cited specifications for this tool.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the Microcel S 2 Centrifugal Cleaning are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No specifications for the Microcel S 2 Centrifugal Cleaning are on record.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Microcel S 2 Centrifugal Cleaning are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Microcel S 2 Centrifugal Cleaning are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Microcel S 2 Centrifugal Cleaning are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Microcel S 2 Centrifugal Cleaning are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Equipment inventory listing
- [2]Microcel S 2 Centrifugal Cleaning — Speedline | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 1, 2026.
Compare with similar tools
View all →The Glen/YES 1000FP is a plasma cleaning system designed to accept a range of shelf sizes for changing flat panel industry needs.
The 1000P is a plasma cleaning system with four 16 x 16 inch shelves and a total capacity of 1024 square inches.
The Semitool 11600 SRD is a spin rinse dryer manufactured by Semitool.