Canon
FPA 3030 i 5 + i-Line
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
General reference — not yet source-verifiedA lithography stepper aligns a mask to the wafer surface and exposes a small field in repeated steps across the wafer.
An i-line lithography system uses ultraviolet exposure from the mercury i-line region for pattern transfer in photoresist processes.
Where it fits in the process flow
General reference — not yet source-verifiedA lithography stepper sits early in the wafer fabrication flow, after surface preparation and photoresist coating and before development and downstream pattern transfer steps.
Applications
The Canon FPA 3030 i 5 + i-Line is applied to wafer-level lithography on 6-inch substrates.[1]
What do the numbers mean?
Wafer handling1
Configuration & options5
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the FPA 3030 i 5 + i-Line are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the FPA 3030 i 5 + i-Line are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the FPA 3030 i 5 + i-Line are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the FPA 3030 i 5 + i-Line are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the FPA 3030 i 5 + i-Line are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the FPA 3030 i 5 + i-Line is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Equipment inventory listing
Last updated Sep 26, 2026.
Compare with similar tools
View all →Brooks 017-0146-01 is a prealigner manufactured by Brooks.
The EVG 101 is an advanced resist processing system for spin or spray coating and developing of wafers up to 300 mm.
