Comparison ledger
Applied Materials 0021 20868 Part, Keysight N 9020 A, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0021 20868 PartApplied Materials | N 9020 AKeysight |
|---|---|---|
| OEM | Applied Materials | Keysight |
| Category | Lab & Support Equipment | Lab & Support Equipment |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0021 20868 Part | Keysight N 9020 A |
| Cited variants | — | |
| Specifications | ||
| Configuration | Bar, Bus, Gnd, Turbo Cb Encl, Gen Rack,[2] | — |
| Frequency range (DC coupled, Option 503) | — | 10 Hz to 3.6 GHz[1] |
| Frequency range (DC coupled, Option 508) | — | 10 Hz to 8.4 GHz[1] |
| Frequency range (DC coupled, Option 513) | — | 10 Hz to 13.6 GHz[1] |
| Frequency range (DC coupled, Option 526) | — | 10 Hz to 26.5 GHz[1] |
| Frequency range (AC coupled, Option 503) | — | 10 MHz to 3.6 GHz[3] |
| Frequency range (AC coupled, Option 508) | — | 10 MHz to 8.4 GHz[3] |
| Frequency range (AC coupled, Option 513) | — | 10 MHz to 13.6 GHz[3] |
| Frequency range (AC coupled, Option 526) | — | 10 MHz to 26.5 GHz[3] |
| Maximum analysis bandwidth (standard) | — | 10 MHz[1] |
| Maximum analysis bandwidth (Option B40) | — | 40 MHz[1] |
| Maximum analysis bandwidth (Option B85) | — | 85 MHz[1] |
| Maximum analysis bandwidth (Option B1A) | — | 125 MHz[1] |
| Maximum analysis bandwidth (Option B1X) | — | 160 MHz[1] |
| Resolution bandwidth range | — | 1 Hz to 3 MHz (10% steps), 4, 5, 6, 8 MHz[1] |
| Phase noise at 10 kHz offset (CF=1 GHz, specification) | — | -135 dBc/Hz[1] |
| Displayed average noise level (DANL) at 10 MHz to 2.1 GHz (specification) | — | -144 dBm (1 Hz RBW, 0 dB atten, preamp off)[1] |
| Third-order intermodulation distortion (TOI) at 400 MHz to 1.7 GHz | — | +16 dBm typical[1] |
| Operating temperature range | — | 0 to 55 °C[1] |
| Maximum safe input level (average total power) | — | +30 dBm (1 W)[1] |
| Displayed average noise level (DANL) at 10 MHz to 2.1 GHz, typical | — | -153 dBm[1] |
| Phase noise at 10 kHz offset, CF=1 GHz, typical | — | -117 dBc/Hz[1] |
| Net weight (without options) | — | 18 kg (40 lbs)[1] |
| Analysis bandwidth (maximum with Option B1X) | — | 160 MHz[1] |
Plan your fab
Building a Lab & Support Equipment process? Get a complete equipment list.
Open the fab equipment planner →