Comparison ledger
West Bond 10490, West Bond 7476E, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 10490West Bond | 7476EWest Bond |
|---|---|---|
| OEM | West Bond | West Bond |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | West Bond 10490 | West Bond 7476E |
| Specifications | ||
| Manufacturer | West Bond[1] | West Bond[4] |
| Model | 10490[1] | 7476E[4] |
| Description | Convertible bonder, wedge to ball[2] | Two-way convertible wedge-to-wedge ultrasonic bonder[5] |
| Tool type | Convertible bonder[3] | — |
| Bonding modes | Wedge bonding and ball bonding[3] | — |
| Use | Wire bonding[3] | — |
| Instrument type | — | West Bond Wedge-Wedge Gold Wire Bonder[4] |
| Purpose | — | Used for making electrical contacts between semiconductor dies and packages[6] |
| Bonding technique | — | Wedge-wedge technique using ultrasonic energy[5] |
| Bonding orientations stated | — | 45° wedge bonding; 90° wedge bonding (deep access)[6] |
| Compatible wire materials stated | — | Aluminum or gold wires[5] |
| Wire diameter range stated | — | 0.0007 in. to 0.002 in.[5] |
| Ribbon diameter range stated | — | 0.001 in. to 0.010 in.[5] |
| Default wire | — | 0.001 in. diameter aluminum wire[5] |
| Ultrasonic transducer | — | 4 W, 63 kHz[6] |
| Manual control | — | Manual control via 8:1 reduction ratio micromanipulator arm[6] |
| Sample holder size | — | Up to around 30 mm x 30 mm[5] |
| Wedge angle configurations | — | 45° and 90° (deep access) wedge bonding[6] |
| Wire diameter compatibility | — | Au or Al wires with 25 μm (0.001") diameter[6] |
| Wire size range (thermosonic) | — | Al and Au wires from 0.7 mil to 2 mil in diameter[6] |
| Operator interface | — | Manual control via 8:1 reduction ratio micromanipulator arm[6] |
| Wire feeding | — | Wire clamped and threaded diagonally under the bonding wedge, requiring front-to-back bonding direction[5] |
| Programmable features | — | Dual force (high or low), pure vertical Z, pneumatic braking of all axes during bonding, and radiant tool heat[5] |
| Standard bonding method | — | 45° wire feed, clamps behind the tool, traditional wedge-wedge[5] |
| ESD protection | — | Electroless nickel plating on exposed tool assemblies and other moving parts; powder-coated paint that is dissipative on exposed painted parts[5] |
| Default wire diameter | — | 0.001 in. diameter wire[5] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →