Comparison ledger
Applied Materials Mirra, Lapmaster 12 Benchtop Lapping Polishing, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | MirraApplied Materials | 12 Benchtop Lapping PolishingLapmaster |
|---|---|---|
| OEM | Applied Materials | Lapmaster |
| Category | CMP | CMP |
| Wafer size | Platen3 - Wafer Buff | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | 2000– | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials Mirra | Lapmaster 12 Benchtop Lapping Polishing |
| Cited variants | — | |
| Specifications | ||
| Software | MP2B6.2_28[1] | — |
| Configuration | 3 Polish Platens:[1] | Ring lapper[7] |
| Wafer size | Platen3 - Wafer Buff[1] | — |
| OEM | Applied Materials[1] | — |
| Model | Mirra[1] | 12[4] |
| Equipment type | CMP (Chemical Mechanical Polisher)[1] | — |
| Polish platens | 3[1] | — |
| Platen 1 | STD polish[1] | — |
| Platen 2 | STD polish[1] | — |
| Platen 3 | Wafer Buff[1] | — |
| Polish heads | 4[1] | — |
| Flow controllers | Entegris[1] | — |
| Robot arm | Applied Materials[1] | — |
| Vintage | 1999[1] | — |
| Make | — | Lapmaster[4] |
| Category | — | CMP[5] |
| Type/Application | — | Single sided[6] |
| Plate diameter | — | 12 in[6] |
| No. of conditioning rings | — | 3[7] |
| Base | — | Rigid, lightweight, cast aluminum base[7] |
| Standard RPM | — | 60 RPM[7] |
| RPM range with variable speed drive | — | 0-60[7] |
| Drive motor - lapper | — | 0.5 HP[7] |
| Drive motor - polisher | — | 0.75 HP[7] |
| Length | — | 25 in[7] |
| Width | — | 18 in[7] |
| Height | — | 24 in[7] |
| Estimated shipping weight | — | 240 lbs[7] |
| Approximate weight | — | 135 lbs / 61 kg[8] |
| Approximate dimensions | — | 24.5 in × 17.5 in × 23.8 in (622 mm × 445 mm × 607 mm)[8] |
| Electrical system | — | Various voltages; 50/60 Hz; 1 phase and 3 phase to customer specification[8] |
| Motor | — | 1/3 hp / 0.25 kW motor with gear reducer[8] |
| Abrasive feed system | — | Designed for water or oil based lapping slurries[8] |
| Automatic cycle timer | — | Automatic digital cycle timer[8] |
| Ring configuration | — | Ring lapper[7] |
| Ring ID | — | 4.25 inches[7] |