Comparison ledger
Applied Materials 0010-03254 E Chuck, Fuji NXT II Placement, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-03254 E ChuckApplied Materials | NXT II PlacementFuji |
|---|---|---|
| OEM | Applied Materials | Fuji |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Fuji NXT II Placement |
| Cited variants | — | |
| Specifications | ||
| Make | — | Fuji[2] |
| Model | — | NXT II[2] |
| Vintage | — | 2013[2] |
| Inventory ID | — | 140603-001[3] |
| Fuji serial number | — | 665[3] |
| Hours | — | 17,166[3] |
| Base | — | 4M Base with (2) M6II Modules H01 Heads Installed Dual Lane Independent Base[3] |
| Feeder capacity | — | M3II - Up to 20 types (8 mm tape); M6II - Up to 45 types (8 mm tape)[3] |
| PCB size | — | Double conveyor: 48 x 48 mm to 534 x 510 mm; single conveyor: 48 x 48 mm to 534 x 610 mm[1] |
| PCB load time | — | Double conveyor: continuous 0 sec; single conveyor: 2.5 sec (M3II only); single conveyor: 3.4 sec (M6II only)[3] |
| Placing accuracy | — | Chips: ±0.05 mm (3 sigma); four side leaded: 0.03 mm (3 sigma)[3] |
| Throughput | — | H12HS: 22,500 CPH; H08: 10,500 CPH; H04: 6,500 CPH; H02: 5,600 CPH; H01: 4,200 CPH[3] |
| Applicable components | — | H12HS: 0402 (01005) to 7.5 x 7.5 mm, max height 3.0 mm; H08: 0402 (01005) to 12 x 12 mm, max height 6.5 mm; H04: 1608 (0603) to 38 x 38 mm, max height 9.5 mm; H02/H01: 1608 (0603) to 74 x 74 mm (32 mm x 180 mm), max height 25.4 mm[3] |
| Module width | — | M3II - 320 mm; M6II - 645 mm[3] |
| Machine dimensions | — | 4MII base: L 1390 mm x W 1934 mm x H 1474 mm; 2MII base: L 740 mm x W 1934 mm x H 1474 mm[3] |